PLA-ST 1.75 mm 1 kg Fluorescence Yellow

0 Anmeldelser

Computer & Kontor Printere & Kontor 3D-printer

PLA-ST 1.75 mm 1 kg Fluorescence Yellow

Name: PLA-ST 1.75 mm 1 kg Fluorescence Yellow
Brand: CCTree
SKU: 473347

Varenummer: 473347

0 Anmeldelser

Kort om produktet

Printing Parameters For ST-PLA Filament TypeST-PLABrandCCTREEPrinter TypeMakerbot,FlashForge,Monoprice,Ultimaker XYZprinting,ALUNAR,Creality,Ender 3,QIDIExturderLæs mere om produktet

Kort om produktet

Printing Parameters For ST-PLA Filament TypeST-PLABrandCCTREEPrinter TypeMakerbot,FlashForge,Monoprice,Ultimaker XYZprinting,ALUNAR,Creality,Ender 3,QIDIExturderLæs mere om produktet

Specifikationer

Se alle specifikationer

Dette produkt er ikke på lager

Specifikationer

Se alle specifikationer

Printing Parameters For ST-PLA

Filament Type	ST-PLA
Brand	CCTREE
Printer Type	Makerbot,FlashForge,Monoprice,Ultimaker XYZprinting,ALUNAR,Creality,Ender 3,QIDI
Exturder Type	Direct Drive/Bowden Tube

Layer Height	0.1-0.3	mm
Fill Density	>0.4	mm
Print Speed	40-80	mm/s
Printing Temperature	190-220	℃
Build Bed Temperature	0-50	℃
Retraction Speed	20-50	mm/s

Comparison of physical performance indicators

	PLA	PLA+	ST-PLA
Tensile Strength	65MPa	60MPa	47.9MPa
Elongation at Break	0.05	0.1	0.82
Tensile Modulus	2870MPa	2850MPa	2710MPa
Flexural Modulus	3283MPa	3243MPa	2520MPa
Flexural Strength	97MPa	97MPa	70.7MPa
IZOD Impact Strength	16kJ/m	30kJ/m	162J/m
Shore Hardness	105A	105A	54D
Printing Temperature	190-220℃	190-220℃	190-220℃
Hot Bed Temperature	55-65℃	55-65℃	45-60℃
Density	1.24g/cm3	1.24g/cm3	1.24g/cm3
Melt Flow Index	3.2-4.0(190℃/2. 16kg)	3.2-4.0(190℃/2. 16kg)	6-10(190℃/2.16kg)
performance comparison	ST-PLA>PLA+>PLA

CCTREE ST-PLA Filament Advantage

1. Wide Compatibility:Works perfectly with most FDM 3d printers on the market, such as Creality MK3, Ender 3, Monoprice FlashForge,QID,etc.

2. Tangle Free: Perfect filament winding(Neat winding) that can aviod any tangel with Great printing experience.

3. Easy Print:Excellent layer adhesion to reduce warpage,Low shrinkage rate.It's no need to heat the bed or print in a closed chamber, and no warping when print large models.

4. High toughness:With Special formula improved to be up to 5 Times tougher then normal PLA.

5. Excellent Impact Resistance&Strength

6. Super Good Performance: Cold Resistance& Moisture Resistance:Under -10℃ Still remain certain toughness and After unealed,Can Store at least 6-10 Months Without Change the Quality.

CCTREE Advantages (Why Choice US)

1. We here to guarantee all material we use is 100% virgin material,no recycling.

2. We started to make 3D filament since from 2014 with great experience to make the best filament.With newest and high speed equipment to make high production capacity ,so can delivery order in shorter time.

3. Quality Control:Strict 4 step QC process,control the high technical production, ensure the flowing smoothly.

4. We have more then 40color for choice, We also accept OEM service. All filament are with high quality and cheaper wholesale price. it’s from ship directly from China factory.

5. Provide after-sales technical support and quality guarantee. If there’s quality problem, No excuse. No delay. Replacement or reimbursement will be applied on time.We take the duty from the starting to the end.

Printing Parameters For ST-PLA

Filament Type	ST-PLA
Brand	CCTREE
Printer Type	Makerbot,FlashForge,Monoprice,Ultimaker XYZprinting,ALUNAR,Creality,Ender 3,QIDI
Exturder Type	Direct Drive/Bowden Tube

Layer Height	0.1-0.3	mm
Fill Density	>0.4	mm
Print Speed	40-80	mm/s
Printing Temperature	190-220	℃
Build Bed Temperature	0-50	℃
Retraction Speed	20-50	mm/s

Comparison of physical performance indicators

	PLA	PLA+	ST-PLA
Tensile Strength	65MPa	60MPa	47.9MPa
Elongation at Break	0.05	0.1	0.82
Tensile Modulus	2870MPa	2850MPa	2710MPa
Flexural Modulus	3283MPa	3243MPa	2520MPa
Flexural Strength	97MPa	97MPa	70.7MPa
IZOD Impact Strength	16kJ/m	30kJ/m	162J/m
Shore Hardness	105A	105A	54D
Printing Temperature	190-220℃	190-220℃	190-220℃
Hot Bed Temperature	55-65℃	55-65℃	45-60℃
Density	1.24g/cm3	1.24g/cm3	1.24g/cm3
Melt Flow Index	3.2-4.0(190℃/2. 16kg)	3.2-4.0(190℃/2. 16kg)	6-10(190℃/2.16kg)
performance comparison	ST-PLA>PLA+>PLA

CCTREE ST-PLA Filament Advantage

1. Wide Compatibility:Works perfectly with most FDM 3d printers on the market, such as Creality MK3, Ender 3, Monoprice FlashForge,QID,etc.

2. Tangle Free: Perfect filament winding(Neat winding) that can aviod any tangel with Great printing experience.

3. Easy Print:Excellent layer adhesion to reduce warpage,Low shrinkage rate.It's no need to heat the bed or print in a closed chamber, and no warping when print large models.

4. High toughness:With Special formula improved to be up to 5 Times tougher then normal PLA.

5. Excellent Impact Resistance&Strength

1. We here to guarantee all material we use is 100% virgin material,no recycling.

3. Quality Control:Strict 4 step QC process,control the high technical production, ensure the flowing smoothly.

4. We have more then 40color for choice, We also accept OEM service. All filament are with high quality and cheaper wholesale price. it’s from ship directly from China factory.

PLA-ST 1.75 mm 1 kg Fluorescence Yellow

Kort om produktet

Kort om produktet

Specifikationer

Specifikationer

Produktmål

Nøglespecifikation

Modelbeskrivelse

Information om produktsikkerhed

Produktmål

Nøglespecifikation

Modelbeskrivelse

Information om produktsikkerhed

PLA-ST 1.75 mm 1 kg Fluorescence Yellow

Kort om produktet

Kort om produktet

Specifikationer

Specifikationer

Mere om produktet

Specifikationer

Miljø- og sikkerhedsoplysninger

Hvad andre synes (0)Dette produkt er endnu ikke blevet bedømt.0 Anmeldelser

Mere om produktet

Specifikationer

Miljø- og sikkerhedsoplysninger

Hvad andre synes (0)Dette produkt er endnu ikke blevet bedømt.0 Anmeldelser